Отваря се в нов раздел
База знания на THEO · Уроци

THEO MA1 Series Tutorial | Torch Handling

A laser welding torch is not held like a MIG torch. This video shows how to hold and angle the THEO MA1 Series welding torch on common joints, so you get real penetration instead of a braze and do not send the process beam back up the tool.

Light, not force

Many MIG welders, the presenter included, are used to strong-arming the torch. Light does not need pressure to do its job. Once you have the basics (wire alignment, defocus, your PPE and a comfortable position), torch angle is the last piece. It is just as critical as proper alignment, positioning, staying out of the reflection zone and defocus.

Keep the trigger surface parallel to the joint

The focus lens at the back of the torch directs the beam at the angle the torch was designed for. A good rule of thumb in every welding position: keep the trigger surface parallel to your joint approach, and orient on the end of the wire feed nozzle.

Two common mistakes

  • Shooting straight into the joint: reflection and particulates go back up the focus tube (gas tube). On stainless steel it may not stop you right away, but you will go through more protective windows than you need to.
  • Orienting on the barrel connection: you may still get deposition, but the laser hits the material in the wrong place. The wire can float out of the joint, and even a good-looking joint is more like a braze, because the base material does not get the same penetration.

One hand, like TIG

Holding the torch with both hands, like a MIG, spray or spool gun, creates tension. Watch the guide beam: the small corrections through your wrists make it cut out, and you can break the interlock. Resting your other hand under the torch changes your angle as you move down the joint.

Use your dominant hand and accept the tool for what it is, a laser welder. Think of it more like one-handed TIG welding. And to stay out of the tool’s way, imagine you are laying down glue.

More THEO MA1 Series tutorials

Questions about your machine? Get support in the Приложението THEO Toolbox for iOS and Android.