Descubra lo fácil que es preparación de superficies es con el vanguardia THEO limpiador láser manual, Serie TM.
Elimina el óxido, la pintura y los contaminantes en segundos sin dañar el material base. Portátil, refrigerada por aire y fabricada con precisión, devuelve a las superficies su esplendor original.
Limpie de forma más inteligente con la serie THEO TM.
When every second counts, the TM-300 puts hours back on your clock. With scan speeds up to 7500mm/s and ultra-focused laser output, you control every pass with precision.
Less downtime. More jobs done in no time.
Laser cleaning represents the future of industrial surface preparation. This technology is leaving traditional techniques behind by delivering unmatched precision, efficiency, versatility, and sustainability.
Laser cleaning blasts away rust, paint, oxides, grease, and other contaminants in seconds. The laser beam hits the surface and is absorbed by the unwanted layer. That layer heats up instantly. A microscopic pressure zone forms between the contamination and the base material, lifting the unwanted material away.
Depending on the job, the contamination either vaporizes or breaks into fine particles that can be extracted safely.
The important part: when the process is set up correctly, the base material stays untouched.
That is what makes laser cleaning so useful. It gives you precise surface preparation without grinding, blasting, chemicals, or unnecessary damage.
It works on stainless steel, aluminum, structural steel, copper, stone, and even select woods and plastics.
Some laser cleaners use Continuous-Wave technology (CW). Constant heat input on the surface tends to melt the substrate metal during cleaning, even when the contamination is fully removed.
And even though the result can look optically clean, the metal underneath has already changed.
The TM-300 uses MOPA (Master Oscillator Power Amplifier) pulsed laser technology instead. MOPA delivers short, controlled bursts of energy, the critical factor in cleaning without damage.
The short pulses hit the contamination hard, then give the material time to cool before the next pulse lands. That’s what limits heat spread into the base metal, and substrate damage stays minimal.
MOPA is the way to go if you want contamination gone and your substrate untouched. THEO uses MOPA because controlled cleaning needs controlled energy.
The THEO TM-300 is designed in two versions – Gaussian and Flat Top. Both systems are built on the same 300 W platform.
The difference is how the laser energy is distributed across the spot, and that changes how the machine behaves in real working conditions.
Deeper contaminations (e.g. oxide removal, rust removal).
Untouched base materials (e.g. moulding stations, car body, industrial kitchen)
The TM-300 Laser Cleaner doesn’t demand you to wear hazmat-level PPE, doesn’t create hazardous waste, and doesn’t put your crew at risk.
All you need is a fume extractor and proper PPE (we recommend wearing a PAT breathing system whenever you clean).
With its pulsed laser, THEO TM Series vaporizes contaminants on contact while the extractor draws away airborne particles.
Más seguridad para el entorno. La serie THEO TM incorpora protecciones integradas para que todas las personas que rodean al operario de limpieza se sientan seguras mientras realizan su trabajo.
La THEO MA1 nace de dar a los soldadores la libertad de crear un sistema para el líder mundial en fuentes láser de fibra.
Powered by a single-mode laser source with a 20µm fiber core and a lifespan of approximately 100,000 hours, the MA1 is made to last.
Cada componente clave se desarrolla internamente para garantizar rendimiento superior, calidad asegurada y control total.
THEO Academy es su recurso de referencia para adquirir conocimientos sobre seguridad en la soldadura láser. Está diseñada para que tanto nuestros clientes como la comunidad de soldadores en general aprendan prácticas de seguridad esenciales de forma eficaz.
Con THEO Academy, acceda rápidamente a la orientación de expertos que mejora sus habilidades y garantiza un entorno de soldadura seguro. Manténgase alerta y seguro:THEO Academy se lo pone fácil.
Para prestar toda su atención al trabajo de soldadura o limpieza por láser, debe sentirse cómodo y seguro. El peligro para los ojos es impredecible y, lo que es más importante, no es visible.
Llevar gafas láser es un buen comienzo, pero no es suficiente para evitar daños en la piel mientras se utiliza un láser de soldadura o limpieza. THEO cuida de usted y de su seguridad y ha desarrollado una serie de equipos de seguridad que le mantienen protegido y bajo control.
