THEO Knowledge Base
THEO MA1 Series Tutorial (US) | Gas Plumbing Guide
Like electricity, plumbing the MA1 to your gas source is up to you. Our applications team has tested a lot of hardware, and the parts below are what works most consistently in US shops. The MA1 has a 6 mm push-in gas inlet. It ships with a 10 mm gas hose and one 10 mm…
Get Ready for Delivery — THEO MA1 Series
Everything to have in place before your THEO MA1 Series arrives: laser safety area, dedicated power circuit and plug (EU/US), shielding gas and regulator, door interlock, fume extraction.
THEO MA1 Series | Operating Parameters
Below is a consolidated reference table covering all current MA1 Series handheld laser welder models (MA1‑35, MA1‑45, MA1‑65, and MA1 ULTRA). These details will aid a Laser Safety Officer (LSO) or safety consultant in designing a safe Class 4 laser work environment: selecting appropriate eyewear, defining barriers/enclosures, managing ventilation, and implementing access control procedures. All…
THEO MA1 Series Tutorials | Handheld torch protective cover slide replacements
Issue Date: Nov. 4th, 2025Memo Number: TB.MP.11425ARevision: 1Products Affected: All Handheld Laser Systems Tools: Instructions The following Instructions are intended to guide in the replacement of the protective cover slide (window) in all Theo handheld laser systems. These instructions will reduce contamination of the focusing lens and all other torch optical components. Note: Establish a proper workspace…
THEO MA1 Series Tutorial (US) | Power Connection
How to wire the power cord of the THEO MA1 Series to its plug for a US single phase 200 to 240 V outlet, terminal by terminal.
THEO MA1 Series Tutorials | Gas Regulators
How to connect the THEO MA1 Series to shielding gas: regulators, tubing and fittings, and a tee to switch between argon and nitrogen.
THEO MA1 Series Tutorial (US) | Unboxing and Setup
Unboxing and setup of the THEO MA1 Series, US version: power plug, shielding gas, interlock and loop cable, nozzle, then the wire feeder.
THEO MA1 Series Tutorial (US) | Accessories
What is in the THEO MA1 Series welding accessory kit: gas nozzles, wire feeder tips, the liner attachment, and which nozzle to use when.
THEO MA1 Series Tutorial (EU) | Unboxing and Setup
Unboxing and setup of the THEO MA1 Series, EU version: activation, gas, interlock and loop cable, welding head, then the wire feeder.
THEO MA1 Series Tutorial | MA1 ULTRA UI Walkthrough
A walk through the THEO MA1 ULTRA interface: the precautions screen, basic and expert mode, the details tab, wire feeder settings and tacking mode.
THEO MA1 Series Tutorial | Setting Proper Defocus
How to set the defocus on the THEO MA1 Series: where to start on steel, how the material changes the setting, and what a wrong setting does.
THEO MA1 Series Tutorial | Torch Handling
How to hold the THEO MA1 Series welding torch: a light grip, the torch parallel to the joint, and why it is not held like a MIG gun.
THEO MA1 Series Tutorial | Proper Posture
How to stand and move when welding with the THEO MA1 Series: guide the torch with your body, stay out of the reflection zone, weld vertical down.
THEO MA1 Series Tutorial | MA1-65 UI Walkthrough
A walk through the THEO MA1-65 interface, the same on the MA1-35 and MA1-45: basic and expert mode, the details menu, tacking and pulse settings.
THEO MA1 Series Tutorial | Proper Wire Alignment
How to align the wire on the THEO MA1 Series: a clean, straight wire, fed through torch and tip, the gas tube straight up and the guide beam on the wire.
THEO Dual Wire Feeder Extension Kit | Setting Up the Dual Wire Feeder Kit — Video Tutorial
How to set up the Dual Wire Feeder Kit on the THEO MA1 Series: holder plate, nozzle, splitter box, two wire feeders, dual liner and alignment.