튜토리얼
배송 준비 — THEO MA1 Series
THEO MA1 Series가 도착하기 전에 갖춰야 할 것: 레이저 안전 구역, 전용 전원 회로와 플러그(EU/US), 보호가스와 레귤레이터, 도어 인터록, 흄 배출 장치.
THEO MA1 Series 튜토리얼 (US) | 개봉 및 설치
Unboxing and setup of the THEO MA1 Series, US version: power plug, shielding gas, interlock and loop cable, nozzle, then the wire feeder.
THEO MA1 Series 튜토리얼 (EU) | 개봉 및 설치
Unboxing and setup of the THEO MA1 Series, EU version: activation, gas, interlock and loop cable, welding head, then the wire feeder.
THEO MA1 Series 튜토리얼 (US) | 전원 연결
How to wire the power cord of the THEO MA1 Series to its plug for a US single phase 200 to 240 V outlet, terminal by terminal.
THEO MA1 Series 튜토리얼 | 가스 레귤레이터
How to connect the THEO MA1 Series to shielding gas: regulators, tubing and fittings, and a tee to switch between argon and nitrogen.
THEO MA1 Series 튜토리얼 (US) | 액세서리
What is in the THEO MA1 Series welding accessory kit: gas nozzles, wire feeder tips, the liner attachment, and which nozzle to use when.
THEO MA1 시리즈 튜토리얼 (US) | 가스 배관 가이드
전기와 마찬가지로 MA1을 가스 공급원에 배관하는 일도 사용자의 몫입니다. THEO 애플리케이션 팀이 수많은 하드웨어를 시험했고, 아래 부품들이 미국 현장에서 가장 일관되게 작동합니다. MA1의 가스 입구는 6 mm 푸시인 방식입니다. 기본 구성으로 10 mm 가스 호스와 10 mm…
THEO MA1 Series 튜토리얼 | 핸드헬드 토치 보호 커버 슬라이드 교체
발행일: 2025년 11월 4일메모 번호: TB.MP.11425A개정: 1적용 제품: 모든 핸드헬드 레이저 시스템 공구: 지침 아래 지침은 모든 Theo 핸드헬드 레이저 시스템에서 보호 커버 슬라이드(윈도우)를 교체하는 방법을 안내합니다. 이 지침을 따르면 포커싱 렌즈를 비롯한 토치 내 모든 광학 부품의 오염을 줄일 수 있습니다. 참고: 작업 공간부터 제대로 갖추십시오…
THEO MA1 Series Tutorial | MA1 ULTRA UI Walkthrough
A walk through the THEO MA1 ULTRA interface: the precautions screen, basic and expert mode, the details tab, wire feeder settings and tacking mode.
THEO MA1 Series Tutorial | Setting Proper Defocus
How to set the defocus on the THEO MA1 Series: where to start on steel, how the material changes the setting, and what a wrong setting does.
THEO MA1 Series Tutorial | Torch Handling
How to hold the THEO MA1 Series welding torch: a light grip, the torch parallel to the joint, and why it is not held like a MIG gun.
THEO MA1 Series Tutorial | Proper Posture
How to stand and move when welding with the THEO MA1 Series: guide the torch with your body, stay out of the reflection zone, weld vertical down.
THEO MA1 Series Tutorial | MA1-65 UI Walkthrough
A walk through the THEO MA1-65 interface, the same on the MA1-35 and MA1-45: basic and expert mode, the details menu, tacking and pulse settings.
THEO MA1 Series Tutorial | Proper Wire Alignment
How to align the wire on the THEO MA1 Series: a clean, straight wire, fed through torch and tip, the gas tube straight up and the guide beam on the wire.