Навчальні матеріали
Підготовка до доставки — THEO MA1 Series
Усе, що має бути готове до приїзду вашої THEO MA1 Series: зона лазерної безпеки, окремий силовий контур і розетка (EU/US), захисний газ і редуктор, блокування дверей, витяжка диму.
Інструкція THEO MA1 Series (US) | Розпакування та налаштування
Unboxing and setup of the THEO MA1 Series, US version: power plug, shielding gas, interlock and loop cable, nozzle, then the wire feeder.
Інструкція THEO MA1 Series (EU) | Розпакування та налаштування
Unboxing and setup of the THEO MA1 Series, EU version: activation, gas, interlock and loop cable, welding head, then the wire feeder.
Інструкція THEO MA1 Series (US) | Підключення живлення
How to wire the power cord of the THEO MA1 Series to its plug for a US single phase 200 to 240 V outlet, terminal by terminal.
Інструкції THEO MA1 Series | Газові редуктори
How to connect the THEO MA1 Series to shielding gas: regulators, tubing and fittings, and a tee to switch between argon and nitrogen.
Інструкція THEO MA1 Series (US) | Аксесуари
What is in the THEO MA1 Series welding accessory kit: gas nozzles, wire feeder tips, the liner attachment, and which nozzle to use when.
THEO MA1 Series Tutorial (US) | Підключення газу
Як і з електрикою, підключення MA1 до джерела газу — на вас. Наша команда із застосувань перевірила чимало обладнання, і наведені нижче компоненти дають найстабільніший результат у майстернях США. MA1 має газовий вхід 6 mm із цанговим фітингом. У комплекті йде газовий шланг 10 mm і один 10 mm…
Інструкції THEO MA1 Series | Заміна захисних скелець ручного пальника
Дата випуску: 4 листопада 2025 р.Номер пам'ятки: TB.MP.11425AРедакція: 1Стосується виробів: усіх ручних лазерних систем Інструменти: Інструкції Наведені нижче інструкції описують заміну захисного скла (віконця) в усіх ручних лазерних системах Theo. Вони зменшують забруднення фокусувальної лінзи та решти оптичних компонентів пальника. Примітка: облаштуйте належне робоче місце…
THEO MA1 Series Tutorial | MA1 ULTRA UI Walkthrough
A walk through the THEO MA1 ULTRA interface: the precautions screen, basic and expert mode, the details tab, wire feeder settings and tacking mode.
THEO MA1 Series Tutorial | Setting Proper Defocus
How to set the defocus on the THEO MA1 Series: where to start on steel, how the material changes the setting, and what a wrong setting does.
THEO MA1 Series Tutorial | Torch Handling
How to hold the THEO MA1 Series welding torch: a light grip, the torch parallel to the joint, and why it is not held like a MIG gun.
THEO MA1 Series Tutorial | Proper Posture
How to stand and move when welding with the THEO MA1 Series: guide the torch with your body, stay out of the reflection zone, weld vertical down.
THEO MA1 Series Tutorial | MA1-65 UI Walkthrough
A walk through the THEO MA1-65 interface, the same on the MA1-35 and MA1-45: basic and expert mode, the details menu, tacking and pulse settings.
THEO MA1 Series Tutorial | Proper Wire Alignment
How to align the wire on the THEO MA1 Series: a clean, straight wire, fed through torch and tip, the gas tube straight up and the guide beam on the wire.