新しいタブで開きます

チュートリアル

納品前の準備 — THEO MA1 Series

THEO MA1 Series の到着前に整えておくもの:レーザー安全区画、専用電源回路とプラグ(EU/US)、シールドガスとレギュレーター、ドアインターロック、ヒューム排気。.

THEO MA1 Series Tutorial (US) | Unboxing and Setup, video

THEO MA1シリーズ チュートリアル(US) | 開梱とセットアップ

Unboxing and setup of the THEO MA1 Series, US version: power plug, shielding gas, interlock and loop cable, nozzle, then the wire feeder.

THEO MA1 Series Tutorial (EU) | Unboxing and Setup, video

THEO MA1シリーズ チュートリアル(EU) | 開梱とセットアップ

Unboxing and setup of the THEO MA1 Series, EU version: activation, gas, interlock and loop cable, welding head, then the wire feeder.

THEO MA1 Series Tutorial (US) | Power Connection, video

THEO MA1シリーズ チュートリアル(US) | 電源の接続

How to wire the power cord of the THEO MA1 Series to its plug for a US single phase 200 to 240 V outlet, terminal by terminal.

THEO MA1 Series Tutorials | Gas Regulators, video

THEO MA1シリーズ チュートリアル | ガスレギュレーター

How to connect the THEO MA1 Series to shielding gas: regulators, tubing and fittings, and a tee to switch between argon and nitrogen.

THEO MA1 Series Tutorial (US) | Accessories, video

THEO MA1シリーズ チュートリアル(US) | アクセサリー

What is in the THEO MA1 Series welding accessory kit: gas nozzles, wire feeder tips, the liner attachment, and which nozzle to use when.

THEO MA1 Series チュートリアル(US)|ガス配管ガイド

電源と同じく、MA1からガス供給源までの配管もお客様の手配です。当社のアプリケーションチームは数多くのハードウェアを試しており、以下の部品が米国の現場で最も安定して使えます。MA1のガス入口は6 mmのワンタッチ継手です。付属品は10 mmのガスホース1本と10 mm…

THEO MA1シリーズ チュートリアル | ハンドヘルドトーチ用保護カバースライドの交換

発行日:2025年11月4日 メモ番号:TB.MP.11425A 改訂:1 対象製品:全ハンドヘルドレーザーシステム 工具: 手順 以下の手順は、すべてのTheoハンドヘルドレーザーシステムで保護カバースライド(ウィンドウ)を交換するための手引きです。この手順により、集光レンズとトーチ内のその他すべての光学部品の汚染を抑えられます。注記:適切な作業スペースを確保し…

THEO MA1 Series Tutorial | MA1 ULTRA UI Walkthrough, video

THEO MA1 Series Tutorial | MA1 ULTRA UI Walkthrough

A walk through the THEO MA1 ULTRA interface: the precautions screen, basic and expert mode, the details tab, wire feeder settings and tacking mode.

THEO MA1 Series Tutorial | Setting Proper Defocus, video

THEO MA1 Series Tutorial | Setting Proper Defocus

How to set the defocus on the THEO MA1 Series: where to start on steel, how the material changes the setting, and what a wrong setting does.

THEO MA1 Series Tutorial | Torch Handling, video

THEO MA1 Series Tutorial | Torch Handling

How to hold the THEO MA1 Series welding torch: a light grip, the torch parallel to the joint, and why it is not held like a MIG gun.

THEO MA1 Series Tutorial | Proper Posture, video

THEO MA1 Series Tutorial | Proper Posture

How to stand and move when welding with the THEO MA1 Series: guide the torch with your body, stay out of the reflection zone, weld vertical down.

THEO MA1 Series Tutorial | MA1-65 UI Walkthrough, video

THEO MA1 Series Tutorial | MA1-65 UI Walkthrough

A walk through the THEO MA1-65 interface, the same on the MA1-35 and MA1-45: basic and expert mode, the details menu, tacking and pulse settings.

THEO MA1 Series Tutorial | Proper Wire Alignment, video

THEO MA1 Series Tutorial | Proper Wire Alignment

How to align the wire on the THEO MA1 Series: a clean, straight wire, fed through torch and tip, the gas tube straight up and the guide beam on the wire.