Návody
Připravte se na dodání — THEO MA1 Series
Vše, co máte mít připravené, než vám dorazí THEO MA1 Series: laserově zabezpečený prostor, vyhrazený napájecí okruh a zásuvku (EU/US), ochranný plyn s regulátorem, blokovací spínač dveří a odsávání zplodin.
Návod THEO MA1 Series (US) | Vybalení a zprovoznění
Unboxing and setup of the THEO MA1 Series, US version: power plug, shielding gas, interlock and loop cable, nozzle, then the wire feeder.
Návod THEO MA1 Series (EU) | Vybalení a zprovoznění
Unboxing and setup of the THEO MA1 Series, EU version: activation, gas, interlock and loop cable, welding head, then the wire feeder.
Návod THEO MA1 Series (US) | Připojení napájení
How to wire the power cord of the THEO MA1 Series to its plug for a US single phase 200 to 240 V outlet, terminal by terminal.
Návody THEO MA1 Series | Redukční ventily
How to connect the THEO MA1 Series to shielding gas: regulators, tubing and fittings, and a tee to switch between argon and nitrogen.
Návod THEO MA1 Series (US) | Příslušenství
What is in the THEO MA1 Series welding accessory kit: gas nozzles, wire feeder tips, the liner attachment, and which nozzle to use when.
Návod k sérii THEO MA1 (US) | Rozvod plynu
Stejně jako elektřinu si i připojení MA1 ke zdroji plynu řešíte sami. Náš aplikační tým otestoval spoustu vybavení a díly níže fungují v amerických dílnách nejspolehlivěji. MA1 má zásuvný vstup plynu 6 mm. Dodává se s plynovou hadicí 10 mm a jednou 10 mm…
Návody THEO MA1 Series | Výměna ochranných sklíček ruční hlavy
Datum vydání: 4. listopadu 2025Číslo sdělení: TB.MP.11425ARevize: 1Dotčené produkty: všechny ruční laserové systémy Nástroje: Pokyny Následující pokyny slouží jako vodítko při výměně ochranného krycího sklíčka (okénka) ve všech ručních laserových systémech Theo. Omezí znečištění fokusační čočky a všech dalších optických dílů hlavy. Poznámka: Připravte si vhodné pracoviště…
THEO MA1 Series Tutorial | MA1 ULTRA UI Walkthrough
A walk through the THEO MA1 ULTRA interface: the precautions screen, basic and expert mode, the details tab, wire feeder settings and tacking mode.
THEO MA1 Series Tutorial | Setting Proper Defocus
How to set the defocus on the THEO MA1 Series: where to start on steel, how the material changes the setting, and what a wrong setting does.
THEO MA1 Series Tutorial | Torch Handling
How to hold the THEO MA1 Series welding torch: a light grip, the torch parallel to the joint, and why it is not held like a MIG gun.
THEO MA1 Series Tutorial | Proper Posture
How to stand and move when welding with the THEO MA1 Series: guide the torch with your body, stay out of the reflection zone, weld vertical down.
THEO MA1 Series Tutorial | MA1-65 UI Walkthrough
A walk through the THEO MA1-65 interface, the same on the MA1-35 and MA1-45: basic and expert mode, the details menu, tacking and pulse settings.
THEO MA1 Series Tutorial | Proper Wire Alignment
How to align the wire on the THEO MA1 Series: a clean, straight wire, fed through torch and tip, the gas tube straight up and the guide beam on the wire.