Vodiči
Pripravite se na dostavo — THEO MA1 Series
Vse, kar mora biti urejeno, preden prispe vaša THEO MA1 Series: lasersko varno območje, ločen električni tokokrog in vtičnica (EU/ZDA), zaščitni plin z regulatorjem, varnostno stikalo na vratih in odsesavanje dimov.
THEO MA1 Series, vodnik (US) | Razpakiranje in nastavitev
Unboxing and setup of the THEO MA1 Series, US version: power plug, shielding gas, interlock and loop cable, nozzle, then the wire feeder.
THEO MA1 Series, vodnik (EU) | Razpakiranje in nastavitev
Unboxing and setup of the THEO MA1 Series, EU version: activation, gas, interlock and loop cable, welding head, then the wire feeder.
THEO MA1 Series, vodnik (US) | Priklop na električno omrežje
How to wire the power cord of the THEO MA1 Series to its plug for a US single phase 200 to 240 V outlet, terminal by terminal.
THEO MA1 Series, vodniki | Regulatorji plina
How to connect the THEO MA1 Series to shielding gas: regulators, tubing and fittings, and a tee to switch between argon and nitrogen.
THEO MA1 Series, vodnik (US) | Dodatna oprema
What is in the THEO MA1 Series welding accessory kit: gas nozzles, wire feeder tips, the liner attachment, and which nozzle to use when.
THEO MA1 Series Tutorial (US) | Vodnik za priklop plina
Tako kot pri elektriki je tudi napeljava plina do MA1 vaša stvar. Naša aplikacijska ekipa je preizkusila veliko opreme in spodaj našteti deli so tisti, ki v ameriških delavnicah delujejo najbolj zanesljivo. MA1 ima 6 mm vtični priključek za plin. Dobavljen je z 10 mm plinsko cevjo in enim 10 mm…
THEO MA1 Series, vodniki | Zamenjava drsnikov z zaščitnim steklom na ročni glavi
Datum izdaje: 4. november 2025Številka dopisa: TB.MP.11425ARevizija: 1Zadevni izdelki: vsi ročni laserski sistemi Orodja: Navodila Naslednja navodila vodijo skozi zamenjavo zaščitnega stekla (okenca) v vseh ročnih laserskih sistemih THEO. S temi navodili zmanjšate onesnaženje fokusirne leče in vseh drugih optičnih komponent v gorilniku. Opomba: Pripravite ustrezen delovni prostor…
THEO MA1 Series Tutorial | MA1 ULTRA UI Walkthrough
A walk through the THEO MA1 ULTRA interface: the precautions screen, basic and expert mode, the details tab, wire feeder settings and tacking mode.
THEO MA1 Series Tutorial | Setting Proper Defocus
How to set the defocus on the THEO MA1 Series: where to start on steel, how the material changes the setting, and what a wrong setting does.
THEO MA1 Series Tutorial | Torch Handling
How to hold the THEO MA1 Series welding torch: a light grip, the torch parallel to the joint, and why it is not held like a MIG gun.
THEO MA1 Series Tutorial | Proper Posture
How to stand and move when welding with the THEO MA1 Series: guide the torch with your body, stay out of the reflection zone, weld vertical down.
THEO MA1 Series Tutorial | MA1-65 UI Walkthrough
A walk through the THEO MA1-65 interface, the same on the MA1-35 and MA1-45: basic and expert mode, the details menu, tacking and pulse settings.
THEO MA1 Series Tutorial | Proper Wire Alignment
How to align the wire on the THEO MA1 Series: a clean, straight wire, fed through torch and tip, the gas tube straight up and the guide beam on the wire.